Close

Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    137,649
    Rep Points
    40,991.2
    Mentioned
    2418 Post(s)
    Rep Power
    410


    Yes Reputation No

    ESMotor develops ES750RS Porsche 991 Turbo upgrade kit based around 991.2 GT2 RS VTG turbochargers - 804 whp, 9.5@146 1/4 mile

    Very cool work here from ESMotor for the Porsche 991.1 and 991.2 3.8 Turbo platform. You likely recall their ES850 kits which utilize Garrett GTX turbochargers and make well over 800 whp on the factory motor and transmission.

    Click here to enlarge

    Well, the ES750RS kits also can top that 800 whp mark on the factory motor but do so utilizing Porsche 991.2 GT2 RS VTG turbo hardware.

    The VTG's appear to spool slightly quicker and offer a bit more mid-range torque at the ~800 whp level but do not hold that torque to redline as well as the GTX's:

    Click here to enlarge

    PorscheBoost assumes the rest of the kit hardware is very similar.

    Does utilizing the VTG's drop the price of the kit considerably? You would have to ask @Emre@Esmotor as pricing was not released.

    It certainly performs quite well with a 9.588 @ 146.51 in the 1/4 mile:

    Click here to enlarge

  2. #2
    Join Date
    Mar 2015
    Posts
    83
    Rep Points
    113.5
    Mentioned
    4 Post(s)
    Rep Power
    2


    Yes Reputation No
    Actually price wise i think is the quite opposite! the GT2RS turbos are stupid expensive! I found them on one website for almost $15K!!! i guess the pricess to pay if you want big vtg turbos.

    I am wondering if we can locate them directly from the turbo manufacturer. i have been told by people who had done this with the 997 GT2RS turbos that the cost saving can reach close to 50%. I think Borg Warner makes them...

  3. #3
    Join Date
    Jul 2010
    Location
    Encino,CA
    Posts
    9,141
    Rep Points
    7,143.2
    Mentioned
    231 Post(s)
    Rep Power
    72


    Yes Reputation No
    Click here to enlarge Originally Posted by kouzman Click here to enlarge
    Actually price wise i think is the quite opposite! the GT2RS turbos are stupid expensive! I found them on one website for almost $15K!!! i guess the pricess to pay if you want big vtg turbos.

    I am wondering if we can locate them directly from the turbo manufacturer. i have been told by people who had done this with the 997 GT2RS turbos that the cost saving can reach close to 50%. I think Borg Warner makes them...
    996 are borg warner K16/24 variants IIRC.
    Burger Motorsports
    Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!

    It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •